Wiha 46790 Testimonial
Today we have the Wiha 46790, 30 item hex as well as Torx workstation collection. This is a brand-new item from Wiha that consists of an option of motorists from their 3K Ergonomic product.
DISCLOSURE: I obtain a little compensation for acquisitions made via these web links. Purchasing devices with these web links is a wonderful means to sustain the network!
Amazon.com Link: https://amzn.to/2aVknu7
KC Tool Link: https://bit.ly/2dte7LB
Unpacking
The collection is packaged with the inch, statistics and also Torx vehicle drivers in 3 tinted coded bags.
Things delivered according to chauffeur deal with shade
The collection consists of the adhering to vehicle driver dimensions:
- Torx T6, T7, T8, T9, T10, T15, T20, T25, T27 and also T30 in BLUE takes care of.
- A 1/4 “Bit owner vehicle driver in a BLUE manage.
Torx as well as 1/4 ″ Bit Holder Drivers
- Round end hex statistics dimensions: 1.5, 2.0, 2.5, 3, 4, 5, 6, 8 as well as 10mm in RED manages.
Metric Hex Drivers
- Inch end hex statistics dimensions: 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4 and also 5/16 in YELLOW takes care of.
Inch Hex Drivers
The adhering to table details the specific component numbers for each and every of the motorists consisted of in this collection.
Component number
Summary
Amazon.com Link
KC Tool Link
45504
T6 x 60mm 3K Ergonomic Torx Driver
Amazon.com
KC Tool
45507
T7 x 60mm 3K Ergonomic Torx Driver
Amazon.com
KC Tool
45508
T8 x 60mm 3K Ergonomic Torx Driver
Amazon.com
KC Tool
45509
T9 x 60mm 3K Ergonomic Torx Driver
Amazon.com
KC Tool
45510
T10 x 80mm 3K Ergonomic Torx Driver
Amazon.com
KC Tool
45515
T15 x 80mm 3K Ergonomic Torx Driver
Amazon.com
KC Tool
45520
T20 x 100mm 3K Ergonomic Torx Driver
Amazon.com
KC Tool
45525
T25 x 100mm 3K Ergonomic Torx Driver
Amazon.com
KC Tool
45527
T27 x 115mm 3K Ergonomic Torx Driver
Amazon.com
KC Tool
45530
T30 x 115mm 3K Ergonomic Torx Driver
Amazon.com
KC Tool
46715
1.5 x 75mm 3K Ergonomic Ball End Hex Driver
Amazon.com
KC Tool
46720
2.0 x 100mm 3K Ergonomic Ball End Hex Driver
Amazon.com
KC Tool
46725
2.5 x 100mm 3K Ergonomic Ball End Hex Driver
Amazon.com
KC Tool
46730
3.0 x 100mm 3K Ergonomic Ball End Hex Driver
Amazon.com
KC Tool
46740
4.0 x 100mm 3K Ergonomic Ball End Hex Driver
Amazon.com
KC Tool
46750
5.0 x 100mm 3K Ergonomic Ball End Hex Driver
Amazon.com
KC Tool
46760
6.0 x 150mm 3K Ergonomic Ball End Hex Driver
Amazon.com
KC Tool
46780
8.0 x 200mm 3K Ergonomic Ball End Hex Driver
Amazon.com
KC Tool
46786
10.0 x 200mm 3K Ergonomic Ball End Hex Driver
Amazon.com
KC Tool
46706
5/64 ″ x 100mm 3K Ergonomic Ball End Hex Driver
Amazon.com
KC Tool
46708
3/32 ″ x 100mm 3K Ergonomic Ball End Hex Driver
Amazon.com
KC Tool
46710
7/64 ″ x 100mm 3K Ergonomic Ball End Hex Driver
Amazon.com
KC Tool
46712
1/8 ″ x 100mm 3K Ergonomic Ball End Hex Driver
Amazon.com
KC Tool
46714
9/64 ″ x 100mm 3K Ergonomic Ball End Hex Driver
Amazon.com
KC Tool
46716
5/32 ″ x 100mm 3K Ergonomic Ball End Hex Driver
Amazon.com
KC Tool
46718
3/16 ″ x 100mm 3K Ergonomic Ball End Hex Driver
Amazon.com
KC Tool
46722
7/32 ″ x 150mm 3K Ergonomic Ball End Hex Driver
Amazon.com
KC Tool
46724
1/4 ″ x 150mm 3K Ergonomic Ball End Hex Driver
Amazon.com
KC Tool
46726
5/16 ″ x 200mm 3K Ergonomic Ball End Hex Driver
Amazon.com
KC Tool
48401
3K Ergonomic 1/4 ″ Magnetic Bit Holder, 125mm
Amazon.com
KC Tool
The collection additionally includes a sheet metal steel stand that consists of openings for every the products.
Steel Stand Unboxed
With the paint, the density of the sheet steel appears to around 90 thousandths which implies it is probably 14 scale steel.
Wall surface density of stand represents 14-gauge steel.
The stand is likewise marked with the Wiha Logo.
Wiha Logo marked right into the steel stand
3K Ergonomic Drivers
Every one of the vehicle drivers originate from Wiha’s reasonably brand-new 3K Ergonomic line of product. The deals with are a cross in between the Wiha Classic as well as Soft Finish chauffeurs with the black being a rubber-like product et cetera being a tough plastic.
Each of the vehicle drivers are tattooed with the component number, motorist kind as well as shaft size.
3K Ergonomic Markings
3K Ergonomic Markings
The Torx vehicle drivers additionally included a UPC on the contrary side.
Reverse side of Torx Drivers had a UPC code, the various other kinds really did not.
This writing will at some point vanish as you can see ideal out of package component of the ink on this Torx chauffeur has actually currently vanished.
Ink currently vanishing from this Torx Driver out of package.
The anti-roll level is embossed with Made in Germany on one side, with the take care of mold and mildew dimension on the various other.
Contrary side, Mold Size?
Significant “Made in Germany”
The motorists match the wait the collar, which is a global dimension throughout every one of these motorists. The resistances on the stand make it sufficient for a smooth fit.
Stand Problem
I did encounter a trouble with among the motorists in the stand. After occupying the stand I discovered that the 10mm chauffeur was bad unemployed surface area. This is certainly not the developed intent.
10mm Driver touching bench surface area
There are 2 various other 200mm shafts in this collection, so allow’s see if we can found out why this is taking place on this shaft as well as not the others. The 200mm shaft worth is gauged from all-time low of the manage collar throughout of the device. Right here exist results:
- 5/16″ motorist: 199mm
- 10mm chauffeur: 204mm
- 8mm motorist: 201mm
Determining 5/16 ″ vehicle driver shaft size– 199mm
Determining 8mm chauffeur shaft size– 201mm
Gauging 10mm chauffeur shaft size– 204mm
Clearly there are allowed production resistances when making any kind of sort of machined component. There was no released resistance information by Wiha for shaft size that I might locate, so allow’s simply claim it is 2% since that is the most awful instance out of those determined. If we consider the deepness of the collar at 6mm (~ 1/4″) when in the stand after that we would certainly require a minimum of (200 + 4 + 6) 210 mm from the top of the owner to the job surface area. Nonetheless if we take a dimension we obtain concerning 209mm This was actually close, however we required an additional mm.
Stand Height is roughly 209mm
So a couple of points possibly occurred. Either the 10mm motorist that I obtained runs out specification or the designer that developed the stand was not familiar with the resistances of the 200mm vehicle driver. Nevertheless, it actually isn’t a huge deal.Stand
Option
To fix this concern I created an option that likewise resolves an additional problem I had with the stand. I made and also 3D-printed a number of feet 50mm in size that will certainly slide onto the sides of stand to provide it one more 5mm of clearance. This additionally has the twin function of function of not permitting the stand to scrape any kind of fragile job surface areas.
3D-Printed Feet to fix stand elevation concern.
I launched this style with a CC 4.0 certificate and also you can locate the designs below if you wish to publish your very own: https://www.thingiverse.com/thing:1698156 The account I made must offer adequate springtime that you will not require any kind of sticky when connecting them. After including the feet we run out clearance concerns with the stand.
Chauffeur Features
Back on the motorists. The hex chauffeurs utilize a device steel induction set shaft. The sphere finishes permit you to drive the bolt at an angle. One point to note is that every one of hex vehicle drivers much less than 3mm usage a 3mm shaft. This indicates that you will not have the ability to reach recessed collection screws with these motorists.
Tiny motorists preserve a 3mm shaft.
On the Torx vehicle drivers just the idea is solidified device steel. The remainder of the shaft is chrome layered.
Identifying and also Organization
One point I wound up doing is including tags per of the ports since it can be tough to check out the dimensions because completions of the chauffeurs are not noted. I thought of marking these with letter strikes, yet that would certainly simply wreck the repainted coating. So I picked making use of strip tags.
Classifying the openings for company
Identified for Easy Access
This is a little bit nit-picking, yet the method I arranged the hex vehicle drivers is by real dimension. That is, the tiniest hex dimension to the biggest. This makes good sense when you can not determine if a screw is inch or statistics as you can simply attempt the following dimension bigger or smaller sized. The Torx motorists as well as 1/4 “little bit owner I saved in the very first 2 best columns in a comparable order.
Hex vehicle drivers arranged from tiniest to biggest
Verdict
General I believe the Wiha 46790 is a terrific bench readied to have if you do not currently have one. It does make it less complicated for day-to-day fixings when you simply require that Torx or hex motorist.
Picture Gallery
Stand Height is around 209mm.
Inspecting Sheet steel edges for squareness
Examining Sheet steel edges for squareness
3D-Printed Feet to resolve stand elevation problem.
3D-Printed Feet to resolve stand elevation problem.
3D-Printed feet mounted
3D-Printed feet contributed to offer an additional 5mm elevation.
Classified for Easy Access
All hex chauffeurs are ball-end design
Just idea of Torx chauffeurs are sworn in solidified
Products delivered according to chauffeur take care of shade
Delivering Contents
Steel Stand Unboxed
Steel Stand Unboxed
Steel Stand Unboxed
Wall surface density of stand represents 14-gauge steel.
Inch Hex Drivers
Brochure Description
Metric Hex Drivers
Torx as well as 1/4″ Bit Holder Drivers
3K Ergonomic Markings
3K Ergonomic Markings
Reverse side of motorist
Torx Driver Markings
Reverse side of Torx Drivers had a UPC code, the various other kinds really did not.
3K Erognomic Drivers consist of both tough and also soft surfaces.
Hex Ball End
Significant “Made in Germany”
Contrary side, Mold Size?
Wiha Logo marked right into the steel stand
Ink currently vanishing from this Torx Driver out of package.
All openings coincide dimension along with the collar on the vehicle driver.
Space because of 10mm motorist striking bench surface area
10mm Driver touching bench surface area
Space from 10mm chauffeur
Determining 10mm chauffeur shaft size – 204mm
Gauging 8mm vehicle driver shaft size – 201mm
Determining 5/16″ vehicle driver shaft size – 199mm
Tiny chauffeurs keep a 3mm shaft.
Classifying the openings for company
Hex motorists arranged from tiniest to biggest
Share this:
- Click to share on Twitter (Opens in brand-new home window).
- Click to share on Facebook (Opens in brand-new home window).